Prod. Ref.                 7110N-000

Safety cat.                S3 M HRO

Range of sizes        39 - 47

Weight (sz. 42)        910 g                                               g

Shape                       B

Wide                          11

Description:  Black water repellent grain leather boot, Sany-Dry^â lining, antistatic, anti-shock, slipping resistant, with steel midsole.

Plus:  Wide metatarsal protection, padded ankle area, bellows tongue, PU/Nitrile Sole resistant to +300° (contact).

Suggested uses:  Any areas where there hanging loads or whenever loads may fall on the metatarsal part of the foot.

Care and maintenance:  Clean after each use and dry off away from direct heat; treat the leather with a suitable shoe-polish. Avoid contact with aggressive chemicals or extreme temperature. Avoid immersion in sea water, lime water or cement mixed with water.

MATERIALS  /  ACCESSORIES

SAFETY  TECHNICAL  SPECIFICATIONS

Clause

EN 344

Description

Unit

Cofra

result

EN 345 requirement

Complete shoe

metatarsal protection

EN 345-2

4.5.2

Shock resistant (free high after shock)

mm

    41

 ³  40

Toe cap: steel made, varnished with epoxy resin, impact resistant until 200 J

4.3.2.3.1

Shock resistance (clearance after shock)

mm

    16

³  14

                and compression resistant until 1500 kg

4.3.2.4.1

Compression resistance (clearance after compression)

mm

    18

³  14

Anti perforation midsole: stainless steel, penetration resistance, varnished with epoxy resin

4.3.3

Penetration resistance

N

    1300

³  1100

Antistatic shoe: the bottom is fit for the dissipation of electrostatic charges

4.3.4.2

Electric resistance

   - wet

   - dry

MW

MW

    30

    65

³  0.1

£  1000

Energy absorption system: polyurethane low density and heel profile

4.3.6

Shock absorption

J

>  40

³  20

Upper

Black water repellent grain leather

thickness 2,0 mm

4.4.6

Water vapour permeability

Permeability coefficient

mg/cmq h

mg/cmq

>  2,3

>  26,2

³  0,8

>  20

4.4.5

Water resistance

minutes

>  90

>  60

Vamp

Felt, breathable, colour dark grey

4.5.4

Water vapour permeability

mg/cmq h

>  6

³  2

lining

Thickness 1,2 mm

Permeability coefficient

mg/cmq

>  50

³  30

Quarter

Sany-Dry^â, breathable, abrasion resistant, colour black

4.5.4

Water vapour permeability

mg/cmq h

>  5

³  2

lining

thickness 1,2 mm

Permeability coefficient

mg/cmq

>  39

³  30

Insole

Antistatic, absorbent, abrasion and flaking resistant.

4.7.4

Abrasion resistance

cycle

>  400

³  400

Sole

Antistatic polyurethane - rubber, directly injected in the upper:

4.8.4

Abrasion resistance (lost volume)

mm³

    140

£  150

4.8.5

Flexing resistance (cut increase)

mm

    1

£  4

Outsole:         black rubber, slipping resistant, abrasion resistant, hydrocarbons resistant,

4.8.7

Interlayer bond strength

N/m

>  5

³  4

                      and hot resistant.

4.8.8

Hot resistance (300 °C)

----

any melting

any melting

Midsole:         black polyurethane low density, comfortable and anti-shock.

4.8.9

Hydrocarbons resistance (DV = volume increase)

%

+  2

£  + 12

ENV 13287

Adherence coefficient of the sole

----

    0,27

³  0,15